ECS A55F-M2 V.2.0 Скачать руководство пользователя | Manualshive

Страница: 69 / 74

background image

65

Setting Up AMD A55 RAID Configuration

b Select “ATI AHCI Compatible RAID Controller-x86 platform” and press
Enter for 32-bit OS or Select “ATI AHCI Compatible RAID Controller-x64
platform” and press Enter for 64-bit OS.

The following Windows Setup screen appears listing both drivers:.

Figure 1.12 Windows Setup—AMD drives listed

Press Enter to continue with Windows XP Installation.

Be sure to leave the floppy disk inserted in the floppy drive until the blue
screen portion of Windows XP installation is completed, then take out the
floppy.

Follow the instructions on how to install Windows XP.

After Windows XP is completely installed, it is recommended that you
install the ForceWare software in order to access the FastBuild RAID Man-
agement tool.

Note:

Each time you add a new hard drive to a RAID array, the RAID driver
will have to be installed under Windows once for that hard drive. After
that, the driver will not have to be installed.

5

6

Figure 1.11 Windows Setup—Selected SCSI Adapter

The following Windows Setup screen appears:

S=Specify Additional Devices ENTER=Continue F3=Exit

Windows Setup

---------

Setup will load support for the following mass storage device(s):

ATI AHCI Compatible RAID Controller-x86 platform

* To specify additional SCSI adapters, CD-ROM drivers, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storag device
manufacturer, press S.

* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.

ENTER=Select F3=Exit

Windows Setup

---------

You have chosen to configure a SCSI Adapter for use with windows£¬
using a device support disk provided bu an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.

ATI AHCI Compatible RAID Controller-x86 platform

ATI AHCI Compatible RAID Controller-x64 platform

«
...
67
68
69
70
71
...
»

Содержание A55F-M2 V.2.0











































































Отзывы:

Нет отзывов

Похожие инструкции для A55F-M2 V.2.0

Бренд: Ampro Страницы: 72

EZ-USB HX2LP CY4605

Бренд: Cypress Страницы: 2

Бренд: ST Страницы: 15

Бренд: Microchip Technology Страницы: 52

Бренд: MSI Страницы: 91

Бренд: Acorp Страницы: 66

Бренд: Hanasis Страницы: 31

GA-Z97X-Gaming G1

Бренд: Gigabyte Страницы: 136

Бренд: SELVA MARINE Страницы: 35

Бренд: Intel Страницы: 1

SR1500AL - Server System - 0 MB RAM

Бренд: Intel Страницы: 180

Бренд: Alinx Страницы: 29

Бренд: Parsun Страницы: 93

Бренд: Aaeon Страницы: 53

Бренд: Aaeon Страницы: 46

Бренд: EVGA Страницы: 35

Бренд: Atmel Страницы: 74

Бренд: Foxconn Страницы: 106

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды