ECS A55F-M2 V.2.0 Скачать руководство пользователя

Страница: 53 / 74

Using BIOS

Boot Override

Use this item to select the boot device.

This page enables you to exit system setup after saving or without saving the
changes.

Save & Exit Menu

Save Changes and Exit

This item enables you to save the changes that you have made and exit.

Discard Changes and Exit

This item enables you to discard any changes that you have made and exit.

Save Changes and Reset

This item enables you to save the changes that you have made and reset.

Save Options

This item enables you to save the options that you have made.

Save Changes

This item enables you to save the changes that you have made.

Discard Changes

This item enables you to discard any changes that you have made.

Restore Defaults

This item enables you to restore the system defaults.

Save as User Defaults

This item enables you to save the changes that you have made as user defaults.

Restore User Defaults

This item enables you to restore user defaults.

Discard Changes and Reset

This item enables you to discard any changes that you have made and reset.

+/- : Change Opt.

Enter/Dbl Click : Select





: Select Screen

/Click: Select Item

F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit

Back to EZ Mode

Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset

Save Options

Save Changes
Discard Changes

Restore Defaults
Save as User Defaults
Restore User Defaults

Boot Override

SATA: WDC WD5000AAKX-001CA0

Back to EZ Mode

This item enables you to back to EZ mode.

Go back to EZ Mode.

Main

Advanced

Chipset M.I.B.III Boot Security Save & Exit

Содержание A55F-M2 V.2.0











































































Результаты поиска

Содержание A55F-M2 V.2.0

Отзывы:

Похожие инструкции для A55F-M2 V.2.0

Бренды по названию

Популярные бренды

ECS A55F-M2 V.2.0, Руководство пользователя

Результаты поиска

Содержание A55F-M2 V.2.0

Отзывы:

Похожие инструкции для A55F-M2 V.2.0

Бренды по названию

Популярные бренды