ECS 945GCT-M3 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 60

ECS 945GCT-M3 Скачать руководство пользователя страница 46

40

Using BIOS

Onboard Device (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

USB Controller (Enabled)

Enables or disables the onboard USB controller. We recommend users keep the
default value. Disabling it might cause the USB devices not to work properly.

USB 2.0 Controller (Enabled)

Enable this item if want to use the USB 2.0.

USB Keyboard Support (Enabled)

Enable this item if you plan to use a keyboard connected through the USB port in a
legacy operating system (such as DOS) that does not support Plug and Play.

USB Mouse Support (Enabled)

Enable this item if you plan to use a mouse connected through the USB port in a
legacy operating system (such as DOS) that does not support Plug and Play.

Azalia/AC97 Audio Select (Auto)

Enables or disables the onboard Azalia/AC 97 audio function. Disable this item if you
are going to install a PCI audio add-on card.

Onboard LAN Device (Enabled)

Enables and disables the onboard LAN.

Onboard LAN BOOT ROM (Disabled)

This item allows you to enable or disable the onboard LAN Boot ROM function.

Onboard 1394 Device (Enabled)

Enable this item if you plan to use the 1394 device.

USB Controller

[Enabled]

USB 2.0 Controller

[Enabled]

USB Keyboard Support

[Enabled]

USB Mouse Support

[Enabled]

Azalia/AC97 Audio Select

[Auto]

Onboard LAN Device

[Enabled]

Onboard Lan Boot ROM

[Disabled]

Onboard 1394 Device

[Enabled]

Phoenix-AwardBIOS CMOS Setup Utility

Onboard Device

Item Help

Menu Level

Press <Esc> to return to the Integrated Peripherals page.

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help

«
...
44
45
46
47
48
...
»

Содержание 945GCT-M3





























































Отзывы:

Нет отзывов