STEP 5
THE FINISHING TOUCHES
1. Finally, use the lever without
attaching a comb to cut around
the base of the neck, the sides of
the neck and the ears.
2. To produce a clean straight line
at the sideburns, reverse the hair
clipper returning to the opposite
side upwards (see figure 7).
3. Place the clipper at right angles
to the head, with the blades lightly
touching the skin and work
downwards. In this way you will
achieve a razor clean cut.
"FLAT TOP" AND MILITARY-STYLE
CUTS
1. Starting with the longest cutting
accessory (12mm), cut from the
nape of the neck to the crown of the
head. Hold the comb attachment
flat against the head and slowly
move the clipper through the hair,
as shown in figure 8.
2. Use the same procedure from the
lower to the upper side of the head
as shown. Then cut the hair against
the direction in which it grows from
the front to the crown and then level
with the sides.
3. To give a “flat top” look, the hair
on top of the head must be cut over
the top of a flat comb instead of
using the comb attachment.
7
8
44
