Page.84.
Manual range and Auto range
When testing, click "Range select" to change the value, click "Auto range" to enter Auto
measurement.
Data hold
Click "Hold data" to enter, the data be hold, the value is green. Press it again to quit.
Relative value measurement
Click "Relative "to enter, the tester Auto-save the data, the displayed new measurement and
relative value is red color. Press it again to quit.
The hold function and the relative value be combined use, the display value is yellow
The meter protection
Voltage protection
You can't input the voltage which more than 660V AC, it's possible to show higher voltage, but
it's may destroy the inner circuit.
Resistance, Continuity, Diode, PTC component Protection
Wrong input voltage, will Auto enter protection state , It only suitable for short and limit time work.
If input voltage over 600V, will damage the meter.
mA current fuse range: 250V 1A
if the current over the rated range ,fuse will melt to protect the meter .Pls use the same model when
Schmidt and Muller Telecommunications Pty Ltd trading as ELECTROCRAFT AUSTRALIA - ABN 79 067 000 426
