Page.7.
31
HDMI output interface
32
Micro SD card moveable,(comes with 8GB,
supports up to 32GB)
33
UTP cable port: UTP cable tester port/ Cable tracer port
34
PSE power sourcing equipment. Tests PoE voltage/LAN test port
35
PoE power supply output or LAN test port (Using test PoE or non-PoE IP camera)
36
Microphone
37
USB 5V 2A power output, transmit data
38
DC 12V 2A charging interface.
39
DC 24V 2A output
40
Audio input/Audio output and earphone interface.
3. Operation
3.1 Installing the
Battery
The tester has built-in lithium ion polymer rechargeable battery. The battery cable inside battery
cabin should be disconnected for safety during transportation!
Prior to the use of the instrument,
the battery cables inside the battery cabin should be well
connected.
Usually it doesn't need to disconnect the cable at the normal use
Pressing the key continuously can power on or off the tester.
Notice:
Please
use the original adaptor and connected cable of the device!
When the battery icon
is full or the charge indicator turns off automatically,
indicate the battery
charging is completed.
Notice: When the Charge Indicator
turns off,
the battery is approximately 90%
charged.
The charging time can be extended for about 1 hour and the charging time within 12
hours will not
damage the battery.
Schmidt and Muller Telecommunications Pty Ltd trading as ELECTROCRAFT AUSTRALIA - ABN 79 067 000 426
