Page.83.
H. Capacitance Measuring
a. Connect the black test lead to the "COM " jack and the red test lead to the "V/
Ω
"
jack.
b. Select " ", enter the capacitance measurement.
c. The tester default auto range status, and manual range by press upward and downward key, Auto rang
by press the key "NEAR"
Manual range: 0.000nF
6.600nF range
00.00nF
66.00nF range
000.0nF
660.0nF range
0.000uF
6.600μF range
00.00uF
66.00μF range
000.0uF
660.0μF range
0.000mF
6.600mF range
00.00mF
66.00mF range
d. Before connect test leads across two sides of the capacitor under measurement, be sure that the
capacitor has been discharged fully.
Note:
a.
The capacitance of a capacitor should be tested separately, should not test in
the installation of circuit.
b.
To avoid electric shock, be sure the capacitors have been discharged fully before measuring the ca
pacitance of a capacitor.
c.
While testing the capacitance of a capacitor to 660uF, the Max time will be 6.6 seconds, if the cap
acitor is leaked or damaged, the data can't be read.
The tester will be normal after disconnecting the capacitor.
WARNING!
To avoid electric shock, be sure the capacitors have been discharged fully before measuring the
capacitance of a capacitor.
Schmidt and Muller Telecommunications Pty Ltd trading as ELECTROCRAFT AUSTRALIA - ABN 79 067 000 426
