ECR International ENVIROair PTAC Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 16

NOTE
The power supply cord with this air
conditioner contains a current detection
device designed to reduce the risk of fire.
Please refer to the section Operation of
Current Device for details.
In the event that the power supply cord
is damaged, it cannot be repaired-it must
be replaced with a cord from the Product
Manufacturer.
IMPORTANT SAFETY INSTRUCTIONS
Power supply cord
with 3-prong grounding plug
and current detection device
WARNING
For your safety
Do not store or use gasoline or other flammable vapors and liquids in
the vicinity of this or any other appliance.
Avoid fire hazard or electric shock. Do not use an extension cord or an
adaptor plug. Do not remove any prong from the power cord.
WARNING
Electrical Information
Be sure the electrical service is adequate for the model you have
chosen. This information can be found on the serial plate, which is
located on the side of the cabinet and behind the grille.
Be sure the air conditioner is properly grounded. To minimize shock
and fire hazards, proper grounding is important. The power cord is
equipped with a three-prong grounding plug for protection against
shock hazards.
Your air conditioner must be used in a properly grounded wall
receptacle. If the wall receptacle you intend to use is not adequately
grounded or protected by a time delay fuse or circuit breaker, have a
qualified electrician install the proper receptacle.
Ensure the receptacle is accessible after the unit installation.
Do not run air conditioner without side protective cover in place.
This could result in mechanical damage within the air conditioner.
Do not use an extension cord or an adapter plug.
NOTE:
The shape may be different according to its model:
Power Card
Power Suppy 230V,15A
230V,20A 230V,30A
4
Do not, under any
circumstances, cut,
remove, or bypass
the grounding prong.