11
Notes:
· If the pairing is not complete within 5 minutes, the speaker will exit the
pairing mode. You need to repeat the pairing steps again.
· After the connection is successful, if you turn the speaker off and turn it
on again, it will reconnect to the last connected device automatically.
Also, a voice prompt “Speaker on, ready to connect” followed by
“Connection successful” will be heard.
· Press and hold
for 5 seconds to clear all pairing records.
Adjust the Master Volume
1. Press
briefly to adjust the speaker volume.
2. Press and hold
to adjust the speaker volume
continuously (volume levels are 0 to 30).
a. Press
briefly to increase one volume level. Press and hold
to
keep increasing the volume until maximum volume level is reached.
b. Press
briefly to decrease one volume level. Press and hold
to
keep decreasing the volume until minimum volume level is reached.
Adjust the Microphone Volume
1. Press
MIC VOLUME
briefly to adjust the microphone volume.
2. Press and hold
MIC VOLUME
to adjust the microphone
volume continuously (volume levels are 0 to 30).
a. Press
briefly to increase one volume level. Press and hold
to
keep increasing the volume until maximum volume level is reached.
b. Press
briefly to decrease one volume level. Press and hold
to
keep decreasing the volume until minimum volume level is reached.
