ECOWITT HP3501, Руководство по эксплуатации

Страница: 33 / 87

33
buttons will sometimes be referred to as just “ next ”, “ previous ”, “ + ” or “ - ”
if that is their function.
Press MENU again to return to the previous menu or normal mode.
5.2.1 Backlight
In backlight setting mode you use the GRAPH/next button to move between
the items you can change:
 Enable or disable time-based backlight control. When disabled the
backlight stays on permanently, otherwise the backlight will be switched
on and off at designated times. Backlight off means the display is off!
 Turn on backlight: Use next button to move between controlling hours
or minutes and use “
+
” and “
-
” buttons to changes the values.
 Turn off backlight: Use next button to move between controlling hours
or minutes and use “
+
” and “
-
” buttons to changes the values.
 Current brightness: Use “
+
” and “
-
” buttons to change brightness level,
indicated by the size of the yellow bar.
Use a single press of
MENU
to go back to the Setup menu, or a long press
to go back to normal mode.
5.2.2 Data Units
In the data unit sub-menu, you can change settings for the following:
 Temperature: Select between F and C by repeatedly pressing the “ + ”
button
 Barometer units: Select between hPa, inHg, and mmHg by repeatedly
pressing the “
+
” button
 Wind speed: Select between mph, knots, m/s, km/h and bft by
repeatedly pressing the “
+
” button
 Solar radiation: Select between w/m2, klux and fc by repeatedly
pressing the “
+ ” button
 Rainfall: Select between in and mm by repeatedly pressing the “ + ”
button