Ecowell WCVP03, Руководство пользователя

Страница: 10 / 15

Roller brush
self-cleaning
After using the whole machine, please use
the self-cleaning function to keep it clean
and tidy.
ROLLER WARM TIPS
Before using the self-cleaning function and
after the self-cleaning, please clean the
sewage in the dust bucket.
Press and hold for 1 second
Before self-cleaning, please place the machine in the tray.
It is recommended to fill the solution bucket with water.
Long press the machine self-cleaning button for 1 second
to start the self-cleaning procedure. After self-cleaning,
the machine will shut down automatically. Each cleaning
time is 2 minutes and 5 seconds.
Roller brush self-cleaning
It is recommended to clean the roller
brush cover regularly after the whole
machine is used to keep it clean and tidy.
1
2
1 First put your finger on the position as shown in (Fig.1),
press the front release button with your thumb, break it up,
and take out the roller brush cover.
2 After removal, rinse with clean water until it is clean (Fig. 2).
Clean the roller
brush
It is recommended to clean the roller
brush after each use of the whole machine
to keep it clean and tidy.
1
2
3
1 Pull up the handle at the left end of the roller brush and
remove the roller brush (Fig. 1)
2 The handle of the roller brush can be removed. Please
use a tool to remove the hair or debris wrapped on the
roller brush head, and then wash and dry the roller brush
with clean water (Fig. 2).
3 After cleaning, first install the roller brush handle, and
then install the roller brush into the floor brush. During
installation, first align the right concave tooth structure of
the roller brush with the right protruding tooth structure,
and then push the left (one end with handle) along the left
groove (Fig. 3).
16 15
https://www.altonindustries.com
info@altonindustries.com