Ecowell WCVP03, Руководство пользователя, Страница: 8 / 15

Preparation
Start of work
Before use, please check whether your
cleaning machine has power. If not, please
charge it in time (refer to "product
charging" for details) and use it after it is
fully charged.
Select the use mode according to the
actual needs.
WARNING
Please do not use foam liquid.
It is recommended to use large-
scale water spraying in heavily
soiled environment.
The on / off key of the machine is located above the handle,
as shown in the figure. Short press this key to start the
machine. After startup, the mode defaults to the normal
cleaning mode without water spraying. Short press this
key again to stop the machine.
The key button of water spray on is shown in the figure.
When working, press this key once to start small-scale
water spray for the floor brush. Press this key twice to start
large-scale water spray for the floor brush. Press this key
three times and the floor brush will stop spraying water.
After using the machine, it is recommended to place it
vertically on the tray specially equipped for you.
PRODUCT OVERVIEW /
INSTRUCTIONS
Fill tank with
water
Add tap water
water spray function. Do not add water higher than 40°C. It
is forbidden to add non original cleaning fluid and unknown
chemicals.
Tighten the cap
1.Unscrew the cap
2.Inject tap water (below 40
℃ ) to the water level.
3.Tightly cover the upper cover of the solution barrel to
ensure that it is tight without looseness (Fig3).
12 11
https://www.altonindustries.com
info@altonindustries.com