14
only if DEEBOT is in an area with a good Wi-Fi signal.
(2) Check if the camera is blocked and remove the blocking object, if any;
(3) For the best results, stay on top of the latest firmware updates and upgrade
your DEEBOT via the ECOVACS app in a timely manner.
3.
Q: There are problems with the maps in the App (skewed or overlapping)?
A: The Restore Map function in Map Management on the App can be used to
restore the original saved maps. Any scheduled cleaning, map edit, or virtual walls
will be lost after restoring maps. Please reset them.
4.
Q: Why is the AIVI 3D module sometimes unable to avoid obstacles?
A: (1) Dust may have accumulated in the AIVI 3D module. We recommend wiping
it with a soft, dry tissue.
(2) The AIVI 3D Smart Detection function is not enabled in the App.
(3) It will occasionally lightly touch obstacles in order to improve coverage. This is
normal.
If DEEBOT bumps into furniture a lot, please contact ECOVACS Customer Service.
5.
Q: Can I disable DEEBOT X1's obstacle detection function and how do I do
it?
A: (1) After completing network setup for your DEEBOT, open the App and go to
Settings > Smart Cleaning Settings > AIVI 3D to disable.
(2) When the AIVI 3D Smart Detection function is disabled, DEEBOT will not avoid
low objects or detect steps lower than 2–6 cm when cleaning. When it encounters
obstacles during cleaning, DEEBOT will slow down and bump into the obstacle
