- 3 -
1. RECOMMENDATIONS
- This Electrical Boiler is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the Electrical Boiler by a person
responsible for their safety.
- Children should be supervised to ensure that they do not play with the Electrical boiler.
- It is necessary one to be familiar and to observe the safety operation and assembly manual.
-
Electrical boiler has IP 20 protection degree, which applies after an installation at place
where it will used.
- After unpacking the boiler, check delivery integrity and equipment..
- Check whether the boiler type corresponds to your needs.
- It is recommendable for each assembly a project to be drafted.
- The assembly may be carried out only by and expert authorized for such activity.
- Boiler assembly should meet the effective prescriptions, norms and to the present manual.
- Connection of the boiler to the power network (if necessary) should be harmonized with the
local power supplier, which should be done by the consumer prior to the purchase of the
boiler.
- Adjustment and commissioning should be carried out only by a service technician approved
by the producer.
- Upon incorrect assembly, damages may occur and the producer shall not be liable thereof.
- In case of failure contact the service organization. Unprofessional intervention may damage
the boiler.
- For correct functioning, safety and long-term operation secure prophylactics at least once a
year.
- In case of damages incurred by unprofessional assembly, as well as upon noncompliance
with the regulations and the operation manual, the producer is not liable and shall not provide
guarantee service.
- The heating installation should have air bleeds at all necessary places.
- It is not allowed to make any changes whatsoever on the electrical diagram of the product,
except for connection of the indoor temperature controller, the equithermal controller or at
telephone control.
- Hydraulic and warm tests should be carried out of each heating installation upon
commissioning.
- The electric boiler may operate at open system up to temperature of 95
o
C max and at closed
system up to 110
o
C at pressure of 1.8 bar in a self-contained heating circuit.
- The assembly organization is obliged to get the client familiar with the operational rules of
the heating system as a whole.
2. INTRODUCTION
The flow-through electric boiler ECOTERMAL is a modern ecological source of heat
designated for story and central heating of small and average size houses and production
facilities. The main advantages of heating with electric power are mostly cost effectiveness,
high efficiency, environmental friendliness and compactness. Electric boiler can be used in
every system of central or story (local) heating in a direct, accumulating or hybrid system. It
can be integrated also in existing heating systems, in parallel with solid fuel boiler (exemplary
diagrams are shown on Fig. 1 and 2, page 6). It is recommended for safer operation the
electric boilers to be mounted in systems operating with a pump securing enforced circulation
of the heat medium.
