Ecotech Serinus 30, Инструкция по эксплуатации, Страница: 42 / 254

TÜV Rheinland Energie und Umwelt GmbH
Luftreinhaltung
Seite 42 von 253
Report on the performance testing of the Serinus 30 ambient air quality
monitoring system manufactured by Ecotech Pty Ltd measuring CO, Report
no.: 936/21221977/D_EN
EP_Ecotech_Serinus30_en.docx
6.1 4.1.7 Data output
The output signals shall be provided digitally (e.g. RS232) and/or as analogue sig-
nals (e.g. 4mA to 20 mA).
6.2 Equipment
PC and network connection
6.3 Testing
The measuring system is equipped with RS232, USB, 25-pin digital and analogue in- and
outputs, TCP/IP Ethernet network connection (optional) and Bluetooth. Moreover, it has a
means to output analogue signals (max. 3 analogue outputs).
6.4 Evaluation
Measured signals are output at the back of the system as follows:
Analogue:
0 – 20, 2 – 20, 4 – 20 mA or 0 – 5 V, selectable concentration range
Digital RS232, USB, 25-pin digital in- and outputs, TCP/IP Ethernet network
connection (optional) and Bluetooth
6.5 Assessment
Measured signals are provided in analogue (0–20 mA, 2–20 mA, 4–20 mA or 0–5 V) and dig-
ital form (via TCP/IP, RS 232, USB; Bluetooth).
It is possible to connect additional measuring systems or peripheral devices via the respec-
tive ports (e.g. analogue inputs).
Does this comply with the performance criterion? yes
6.6 Detailed presentation of test results
Figure 7 shows the rear side of the instrument with its different data outputs.
Figure 7: Rear panel of the Serinus 30