ECOsmarte Planet Friendly® | 612-866-1200 | ECOsmarte.com | Bloomington, MN
9
Warning: Never set OXY or ION to start and stop during times when your pool pump is not running.
Setting Multiple Days of Ionization
Manual Function
The
Manual
feature is used to set the
Ionization
time to be equal to the
POOL
run time. This feature is
usually used at start-up when you fill your pool or need to make a gross adjustment in the copper level in
your water.
To activate this, simply push the “
MAN
” key once. This will set your
ION
time to be equal with your
POOL
run time, and your
OXY
time will read
NONE
. Your pool will now Ionize when your pump is running.
If you need to manually Ionize longer, simply go into your
POOL
setup, and change the
start
and
stop
times of your pump. Then return to the “
Home Screen
” and press the “
MAN
” key to change the
ION start
and stop
times
.
Your screen will now look as shown:
Actual
ION
hours required to get your first residual will be a function of
total gallons
,
TDS
(total dissolved
solids), and
pH below 7.2
of your pool. A water test seeking
0.5ppm copper
should be taken
before
10
hours of
POOL and ION
running time have
passed
. The
pH
will
rise
during
initial
ionization, therefore,
daily adjustments
may be necessary at first on inground pools between 3,500 and 50,000 gallons.
The manual override key “
MAN
” is the most convenient method to put copper constantly into your pool.
Select the “
OXY
” key to switch the unit back to oxygen equal to your programmed
POOL
run time.
Refer to
Programming Manual
for more keypad operation details.
2:22:20P 1/01/2020
Pool 10:00A- 4:00P+
Oxy None
Ion 11:00A- 11:16A-
AUTOMATION
Your water will become predictable after three weeks and the ION and CO2 values can auto repeat for
weeks after dialing them in with water tests. Set “ION” to come on the day before you or your service tests
the copper each week.
Use Keys To Set
Day Run Start Stop
SU OFE 10:00A- 4:00P-
Press
NEXT
When Done