ECOsmarte Planet Friendly® | 612-866-1200 | ECOsmarte.com | Bloomington, MN
11
5 - Wire Stripper/ Crimper/ Cutter
6 - Pipe Cutter
7 - Glue and Primer
8 - Drill
MATERIALS REQUIRED FOR SPAS
1 - Two (2) 11/2” x 3/4” Slip by Thread Reducer Brushing
2 - Two (2) 3/4” x 3/4” Barb by Male Thread Fittings
3 - Two (2) 1/2” x 3/4” Barb by Male Thread Fittings
4 - Four (4) Hose Clamps 1”
5 - One (1) 3/4” Clear Flexible Hose
6 - Six (6) Zip Ties
7 - Three (3) Female Wire Connectors
COMPATIBLE PRODUCTS
- Algaecide 40, 60
- Non-Chlorine Shock - Potassium-Based Only
(GLB OxyBrite is the best)
- Calcium Chloride or Hardness Increaser
- Sea Klear: requires backwash at 48 hrs.
Complete List Located on:
www.ecosmartecloud.com
1 - Phillips Screwdriver
2 - Flathead Screwdriver
3 - 1/2” Drill Bit
4 - 1/2” Tap
ABSOLUTELY INCOMPATIBLE
PRODUCTS
- Any Algaecide w/metal
- Any SOLID CHLORINE
- Any metal remover
- Scale Control or Clarifier
- Sodium-Based Non-Chlorine Shock
- Enzymes
- Alkalinity Up/ Powdered pH Down or Up
TOOLS REQUIRED FOR POOLS OR SPAS
ADDITIONAL PARTS CO2 CONTROL
1 - Two (2) 2” x 3/4” Slip by Thread Reducer Bushing (CO2)
2 - One (1) 3/4” Clear Flexible Hose
3 - One (1) 20lb Cylinder for Outside of Cabinet, Changes Once a Year
OR
Two (2) 5lb Cylinder for Inside Cabinet, Changes Quarterly with New Waterfill
1
2
3
3
1
2
4
8
7
7
6
6
5
5
1
2
3
4
Selecting A Tap For Side Stream (On Ozone Line)
Pressure side of the filter pump one, ideally between shut off valves. Take care to allow heater union
release. Ideally, select the tap after the pump AND after the heater.