12
10. REPLACING THE FUSE
A fuse holder is located on the back of the unit next to the power cord.
To replace or check the fuse:
Remove the fuse holder by pressing on the clip and pulling it straight out.
If the fuse is blown:
Replace with the standard replacement fuse. Insert the new fuse into the
fuse holder. Press the assembly straight in until it latches.
110- 120 volt models: Fusing current no more than 1.0 AMP.
220- 240 volt models: Fusing current no more than 0.5 AMP.
CAUTION!
Open doors and windows when you return to the room
after the use of AWAY mode to let the ozone out!
ATTENTION!
Always ensure the room or area is UNOCCUPIED
before using the AWAY mode!
