eCopy ShareScan
®
Installation and Setup Guide
|
73
Configuring the fax address format
For fax connectors, you must define the fax address format required by your fax server
application or Internet fax service. A sample format is shown below:
To configure the fax address format:
You configure the fax address format in the Fax Address Format window. The following table
shows the location of the window for each fax connector:
TABLE 14.
Fax Address Format window access
Connector
Window access
Fax via Microsoft
Exchange
From the connector Wizard or on the Fax Format tab of the Fax via Exchange
Properties window.
Fax via Lotus Notes
On the Fax Format tab in the connector's Properties window.
Fax via SMTP
From the connector Wizard or on the Fax Format tab of the Fax via SMTP
Properties window.
Recipient Name
Fax Number
Name Separator
Prefix
Fax Prefix
Cover Page Attached
Suffix