eCopy 3323B001 - imageFORMULA ScanFront 220e Скачать руководство пользователя страница 142

Страница: 142 / 192

134

Reference: Connector-specific configuration information

Destination settings

Scan to eCopy Desktop enables you to scan to the following destination types:

■

Windows Folder

■

Novell Folder

■

FTP Folder

■

USB Flash Drive

For each type of folder, except for the USB Flash Drive, you must supply the folder location and
authentication settings.

TABLE 43.

Scan to eCopy Desktop: Destination settings

Section

Field

Description

If scanned image file already exists

Specifies the action for the connector to take if the recipient’s scan
inbox already contains a scanned document with the same file
name:

■

Overwrite always: Replaces an existing scanned document with
the one the connector is currently saving.

■

Return error: Displays an error message prompting the user at
the device to change the file name.

■

Create unique file name: Adds a unique number to the file
name, for example filename.1, filename.2. The scanned
document is saved to the location using a unique file name and
the existing document is not overwritten.

Folder Location

(For an FTP folder
you must enter and
test the
authentication
information before
you select a folder
location.)

Path to the
folder

Destination information for the scanned documents.
Click the Browse button and then select a folder.

Enable
subfolder
navigation

Enables users to select a subfolder at the device.

Maximum
folder levels

The number of folder levels down that users may navigate.

Содержание 3323B001 - imageFORMULA ScanFront 220e

































































































































































































Результаты поиска

Содержание 3323B001 - imageFORMULA ScanFront 220e

Отзывы:

eCopy 3323B001 - imageFORMULA ScanFront 220e, Инструкция по установке и настройке, Страница: 142 / 192

Результаты поиска

Содержание 3323B001 - imageFORMULA ScanFront 220e

Отзывы: