EcoPower Electron 65 Quad Скачать руководство пользователя страница 6

06

 

Never attempt to charge or discharge the following types of batteries.

A battery pack which consists of different types of cells (including different 

manufacturers)

A battery that is already fully charged or just slightly discharged.

Non-rechargeable batteries (Explosion hazard).

Batteries that require a different charge technique from NiCd,

NiMh, LiPo or Gel cell (Pb, Lead acid).

A faulty or damaged battery.

A battery fitted with an integral charge circuit or a protection

circuit.

Batteries installed in a device or which are electrically linked to

other components.

Batteries that are not expressly stated by the manufacturer to be

suitable for the currents the charger delivers during the charge

process.

Please kep in mind the following points before commencing

charging:

Did you select the appropriate program suitable for the type of

battery you are charging?

Did you set up adequate current for charging or discharging?

Have you checked the battery voltage? Lithium battery packs

can be wired in parallel and in series, i.e. a 2 cell pack can be

3.7V (in parallel) or 7.4V (in series).

Have you checked that all connections are firm and secure?

Make sure there are no intermittent contacts at any point in the

circuit.

SPECIAL FEATURES

Содержание Electron 65 Quad























Отзывы: