Page 5
OMNI by EconoHeat
Speciications
BTU
INPUT:
150,000
BTU
OUTPUT:
120,000
GALLONS PER HOUR:
1
REQUIRED
VOLTS:
115
AMPs
FULL
LOAD:
14.6
FAN
MOTOR
HP:
1/4
FAN
MOTOR
RPM:
1075
CFM (FREE AIR):
3762
CFM w/ DUCTWORK @ 100 ft.:
1380
EFFECTIVE AIR FLOW:
60 ft
FLUE
SIZE:
8"
WEIGHT:
240
lbs
L x W x H (including burner):
54” x 22” x 25.5”
SHIPPING WEIGHT:
375 lbs
SHIPPING DIMENSIONS (L x W x H):
64.5” x 30” x 49”
Notes:
1. All illustrations and speciications contained herein are based on the latest information
available at the time of publication approval. EconoHeat reserves the right to make
changes at any time without notice, in materials, speciications, and models or to
discontinue models.
2. These appliances are designed for commercial or industrial use only. Installation and
use of this waste-oil burning appliance shall be in accordance with the Standard for
the Installation of Oil Burning Equipment-ANS/NFPA 31-1987, and National Electric Code -
ANSI/NFPA 70-1990 and the requirements of the inspection authorities having jurisdiction.
3. Output depends on BTU content of oil used.
4. Atomizing Air Pressure for all fuels 10 P.S.I.
5. Furnace not to be used with air ilters.
6. Intended maximum outlet air temp. 200 degrees F. (93 degrees C) or less.
7. Clearance from combustible materials on all models not to be less than:
TOP-
18”
BOTTOM-
18” SIDES-
18”
REAR-
18”
FRONT-
48”
FLUE
PIPE-
18”
Mounting Dimensions:
Heater (top)
35.5”
20”
240
