Fuel type
User can changes fuel types without turning unit off
Clock set
Sets the internal clock, dd:mm:yy hh:mm:ss
2.13 Control
Entering the Control screen lows user to view contact information for ECOM, millivolt reading of
sensors, operation hours, serial number, battery voltages, and software version of the analyzer. It
also allows access to calibration screens.
2.14 Internal – access through the Adjustments screen
Print Contrast
–
For models equipped with Thermal printers,
Allows user to adjust intensity of the printout.
Not applicable to units sold in N. America.
Re-Load function
– Activates battery recharge for the NiMH batteries in the Remote display. See more
detail on this feature in Section 6 – Technical Notes.
Key Beep
– user can activate or de-activate the audible beep when keys are pressed.
Probe heating
– the pistol grip probe has a heating element near the soot test groove to that eliminates
moisture during the soot test. This feature is automatically activated when the soot test is performed. It can
also be manually activated.
Language
– English or French can be selected.
Datalogger – if using the SDMM Card for datalogging, this function is where you set the logging
frequency for the card. Times can be set for a frequency between 1 second and 255 seconds.
