Switch-off
• Keep setting key pressed for 4 s
• If no key is pressed during operation, the display lighting is switched off
after 10 minutes.
• The device switches off after 60 minutes.
Change Batteries
NOTICE
The two 1.5 V AA batteries must be replaced when the battery capaci-
ty indicator flashes.
1.
Press the locking latches on the housing head inwards.
2.
Pull off the housing head to the front.
3.
Remove the circuit board.
4.
Change batteries.
5.
Reassemble ecom-AK in reverse order.
Connection with the PC
NOTICE
A special cable is required for the connection to the PC:
• PC interface RS232: data cable AK-PC or
• PC interface USB: Data cable AK-PC + adapter cable RS232-USB
1.
Start the programme with „Start“ „Programmes >“ „AKPC“.
2.
Select COM port from the „Setup“ menu.
3.
Select COM Port.
4.
Confirm with „OK“.
5.
Connect the ecom-AK to the PC via the connection cable.
6.
Connect ecom-AK to the automatic burner control.
7.
Switch on the ecom-AK.
