5
Initiation/Measurement
NOTICE
NOTICE
NOTICE
When using the AK PC software, the ecom-AK must not be started in
PC mode.
With the Satronic or Siemens PC software, hold down the setting key
until PC mode appears on the display.
Applies only to Siemens burner controls!
Different Readout Modes According to Firing Automatic Type
Set firing automatic in diagnosis mode:
• Set firing automatic to diagnosis mode.
1.
Set ecom-AK to the interference suppression button.
2.
Enable ecom-AK by pressing the setting key.
3.
ecom-AK searches for automat information.
4.
ecom-AK switches off after 2 minutes if it does not detect any signal.
CAUTION
Malfunction of the Readout Process
Exposure to strong light can disturb the readout process.
Protect ecom-AK from strong light.
Readout
Firing Automat in Operating Position:
• Press the reset button on the firing automat for < 3 s.
Firing Automat in Lockout Position:
• Press the reset button on the firing automat for < 3 s.
• Press the reset button again on the firing automat for < 3 s.
