2
Preface
Dear Customer,
Thank you for purchasing this ECOLINE 1-channel digital recorder. You made the right decision in choosing
this state-of-the-art technology, which complies with the current standards of domestic and European
regulations. The CE has been proven and all related certifications are available from the manufacturer upon
request.
To maintain this status and to guarantee safe operation, it is your obligation to observe these operating
instructions! In the event of questions, please contact your local specialist dealer.
This ECOLINE 1-channel digital recorder is used in combination with connected video signal sources (B/W
and colour cameras) and video output devices (monitors, LCD screens) for object surveillance. Data storage
is subject to local national data-protection guidelines. During installation, draw your customers’ attention to
the existence of these guidelines. Via the serial 9-pole D-Sub connector, you can transfer picture data to a
computer and open it with special software. You can also view and archive complete video sequences at
your PC.
Precautions
The ECOLINE 1-channel digital recorder and connected components must be kept free of moisture (cellars
and similar surroundings are to be strictly avoided). Use of this product for other than the described purpose
may lead to damage of the product. Other hazards such as short-circuiting, fire, electric shock, etc., are also
possible. The recorder is designed for operation with mains electricity at 230 Volt AC / 50 Hz.
No part of the product may be changed or modified in any way. Connection to the public power network is
subject to country-specific regulations. Please be aware of applicable regulations in advance.
To avoid fire and injury,
please observe the
following:
•
Securely fasten the device at a
dry location in the building.
•
Make sure there is sufficient
ventilation.
•
Do not expose the device to
temperatures less than -10°C
or more than 50°C.
•
The device is designed for
indoor use only.
•
Humidity must not exceed
90% (non-condensed).
•
Ensure that the voltage is
disconnected when
performing work on the
device.
Please observe the following
regulations to ensure
trouble-free operation of
your device.
•
The ECOLINE 4-channel
digital recorder is connected
to 230V / 50Hz.
•
The recorder should be
connected to the 230V AC
building mains by means of a
separate, electrically
protected line.
•
Connection work to the
building mains is subject to
country-specific regulations.
General:
Improper or careless installation
work may lead to faults and poor
image quality. Therefore please
read the instructions very carefully
and follow the installation
instructions for lines and
components precisely.
The manufacturer reserves
the right to make technical
modifications at any time.
