5
Structure of the Multiline 1000S
5.1
Front panel
1
2
3
4
5
6
7
8
9
10
11
Fig. 2: Front panel
1
Liquid Crystal display
2
‘Alarm’ LED Display (red):
Flashes if a problem occurs and/or if the
‘Empty’
signal is transmitted. More detailed information on
Display
3
Pressure gauge:
Indicates spray air pressure
4
Pressure controller:
Setting for spraying air pressure
5
‘ENTER’ acknowledge/cancel button:
This is used to confirm parameters selected and to
abort metering
6
‘Down’ setting button
This is used for adjustment of the metering time and for
decreasing the values set for the parameters
7
‘Up’ setting button
This is used for adjustment of the metering time and for
increasing the values set for the parameters
8
‘MAN’ button for manual mode of operation:
Pressing the MAN button activates manual mode of
operation
9
‘AUTO/CONT’ button for toggling between
continuous and automatic mode:
Toggles between automatic and continuous operation.
The corresponding appurtenant LED illuminates.
10
‘CONT’ LED indicating ‘Continuous operation’
(green):
The unit is in continuous mode of operation
11
‘AUTO’ LED indicating ‘Automatic operation’
(green):
The unit is in automatic mode of operation
Structure of the Multiline 1000S
19
417101439 Rev. 2-09.2019