Operating Your Double Universal Air Mover Heater
Step 1- Attach the spring loaded heater body to virtually any axial or centrifugal air mover.
Step 2- Plug attached power cord(s) into acceptable power source. Each power cord operates a single
heating element and utilizes 7.5 amps of power at 115vac. If both elements are not required for your
application a single element can be used.
Step 3- Turn on air mover (Important: air MUST flow through the heater coils to ensure that proper
minimum airflow is maintained to prevent overheating and shut off)
Step 4- Move red power switch to Up/On position. Indicator light will be illuminated when on.
Step 5- Adjust thermostat setting to desired Maximum temperature. (See Instructions for Temperature
Controller on page 16)
14
