IMNL
-
003.181008
© Ecoflo Wastewater Management Pty Ltd
Page 11
1.
On the Fan Housing, remove the four screws from the
rectangular access cover and then carefully lift off
cover to expose wire connector.
2.
Thread the Transformer wire through the hole in the
Cover.
3.
Insert the Positive wire (white line); from the Trans-
former, in line with the Red Fan wire and tighten
screw to secure wire.
4.
Insert the Negative wire (black line); from the
Transormer, in line with the Black Fan wire and tight-
en screw to secure wire.
5.
Carefully replace the Cover; back on the Fan Housing
and tighten the four screws .
STEP 4: POWERING YOUR FAN
Mains Power
A 240/12 volt regulated transformer is included to run
the fan from mains power. Connect the fans to the
transformer as follows:
We recommend a spare fan is kept on hand at all times, particularly after a year of use.
Go to
or call 1300 138 182 for replacement or spare fans.
Solar Power –
refer to Solar Panel Installation Manual
1
3
2
4
