Stap 1:
Loosen the screws in the bottom of the cord dimmer (G)
Stap 2:
Remove the dimmer button and the top of the cord
dimmer (A, B)
Stap 3:
Loosen the screws to be able to attach the installation wire
later (D)
Stap 4:
Strip the wires to provide good connections
Stap 5:
Place wires L (brown) and N (blue) in the connections (D)
Stap 6:
Screw the wires into the connections (D)
Stap 7:
Now repeat steps 3 to 6 for the other side (connection of
the cord to the lamp)
Stap 8:
Check if the wires are securely tightened
Stap 9:
Put part F (bottom) and part B (top) together again
Stap 10:
Tighten the screws in the bottom of the cord dimmer (G)
Stap 11:
Place the dimmer knob back on to dimmer pin (A)
Input voltage
220-240V Vac, 50Hz
Load wattage
0-50W LED 10-100W halogen lamps/
light bulbs
Suitable for
LEDs, halogen lamps, light bulbs
Type of dimmer
R,C Phase cut
Operation
Push-turn button
Working temperature
max. 35°C
Dimensions
96.7 x 30.4 x 39.4 mm
Weight
30 gr.
ECO-DIM.08
Installation
A
B
C
D
E
F
G
√ 0-50W LED
√ Phase cut (R, C)
√ Optimal dimmability and light stability
√ MIN. and MAX. adjustment
√ Protection against interference signals
√ Noiseless dimming
√ Soft start system
√ Press / rotary knob
Cord dimmer with rotary knob and both MIN and MAX adjustment. This
allows you to get the best dimmability from every LED lamp. In addition, you
can simply use the well-known push / turn knob (instead of a push button).
Much more user-friendly to operate!
√ Overload Protection
√ Short Circuit Protection
√ Over Temperature Protection
