4
Installation and commissioning
5. To be carried out by two people: Remove the control plate and carefully set it aside (DO NOT
lay it down) so that it does not get damaged.
6. If the cables are too short:
DANGER
Voltage
An electric shock can lead to severe physical injury or death.
•
Make sure there is no power to the cable before you remove it.
°
Remove the inverter AC cables (note the sequence).
°
Remove the inverter AC cables from the cable duct and cut off the lower cable tie.
°
Place the spiral hose and cables to one side (in the cabinet if necessary).
7. To be carried out by two people: Slide the first ecoBatteryModule (master) as far as it will go
into the lowest slot.
INFORMATION
Make sure that cables do not get trapped.
8. Screw the ecoBatteryModule in place at the front.
TM_ecoBatterySystem_2.2_en-UK
19
Содержание ecoBatterySystem
Страница 4: ...Content II TM_ecoBatterySystem_2 2_en UK ...