ECOALLIANCE DYNAHEAT ECO-155LE, Руководство пользователя

Страница: 7 / 18

7
Caution
Do not use the shower or any hot water for at
least one minute after recovery from a power cut.
Hot water may
unexpectedly exit from the
shower.
When using the emergency water valve, first
verify the temperature of the hot water and ensure
you use a heat resistant collection vessel.
Hot water will be
discharged. Ensure you
avoid getting burnt. Glass collection vessels could
be broken by the heat.
In the event of any abnormality, turn the earth
leakage breaker to “OFF”
Use of the breaker in any
abnormal situation could
result in electric shock or fire. Please contact the
dealer from whom your purchased the product.
Do not install the unit anywhere it will be exposed
to seawater.
Could result in the unit malfunctioning.
Do not run the hot water directly into sink outlets
etc
Could result in
being burnt or the
drainage pipe
being damaged by
the hot water. Ensure you mix with cold water
when running the hot water.
WARNING:
If the hot water system is not used for two weeks
or more, a quantity of highly flammable hydrogen
gas may accumulate in the water heater.
To dissipate the gas safely, it is recommended
that a hot tap be turned on for several minutes or
until discharge of gas ceases. Use a sink, basin
or bath outlet, but not a dishwasher, clothes
washer or other appliance.
During the procedure, there must be no smoking,
open flame or any electrical appliance operating
nearby. If hydrogen is discharged through the tap,
it will probably make an unusual sound similar to
air escaping.