Ecoair ECO1218SD, Инструкция по установке и эксплуатации, Страница: 14 / 29

Operation of remote control
★
About AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on the
LCD, the unit will be in accordance with the room temp. automatically to select the suitable
running method and to make ambient comfortable.
★
About turbo function
If start this function, the unit will run at super-high fan speed to cool or heat quickly so that
the ambient temp. approaches the preset temp. as soon as possible.
★
About lock
Press +and - buttons simultaneously to lock or unlock the keyboard. If the remote
controller is locked, the icon will be displayed on it, in which case, press any button,
the mark will flicker for three times. If the keyboard is unlocked, the mark will disappear.
★
About switch between Fahrenheit and Centigrade
Under status of unit off, press MODE and - buttons simultaneously to switch ◦ C and ◦ F.
Changing batteries and notices
1.
Slightly to press the place with , along the arrowhead direction to push the back cover of wireless
remote control. (As show in figure)
2.
Take out the old batteries. (As show in figure)
3.
Insert two new AAA1.5V dry batteries, and pay attention to the
polarity. (As show in figure)
4.
Attach the back cover of wireless remote control. (As show in figure)
★
NOTE:
Fig.1
●
When changing the batteries, do not use the old or different batteries,
otherwise, it can cause the malfunction of the wireless remote control.
●
If the wireless remote control will not be used for a long time, please
take them out, and don't let the leakage liquid damage the
wireless remote control.
●
The operation should be in its receiving range.
●
It should be placed at where is 1m away from the TV set or stereo sound sets.
●
If the wireless remote control can not operate normally, please take them out, after
30s later and reinsert, if they cannot normally run, please change them.
Fig.2
Sketch map for
changing batteries
10