background image

OUTDOOR

HEAVY-DUTY TIMER

ITEM #1001 804 572

Safety Information

TROUBLESHOOTING

Installing the timer outdoors

Suitable for indoor/outdoor use-Store indoors while not in use. For temporary outdoor use.
NOTE: 

* Before initial use, please plug your timer for at least 30 minutes to charge the internal battery. After

  the LCD display appears, your unit will be ready for programming.

* The mounting nail or screw head must extend at least 3/16 in. out from the wall (nails or screws 

  not included).

* NOTE: The LCD display might turn off after a long time without use. Plug the timer into an outlet

  once every 3 months to keep the battery charged.

LCD Layout:

2. Press the "SET" button to enter the hour setting. Press "+" or "-" buttons to set the current hour. 

  Be sure that AM or PM appears correctly.

3. Press the "SET" button to enter the minute setting, press the "+" or "-" buttons to set the current 

 minute.

4. Press the "SET" button to finish setting the current time and return to normal display.

5. While setting those processes above, press and hold the “SET” button to clear the setting and go

  back to the original timer settings. While setting those processes above, press the “     ” button or

  wait for 15 seconds to return back to the standby display. 

MODE Setting

Press the “MODE” button to choose the desired mode. 

ON, OFF, RDM Timer, AUTO Timer, AUTO CDS, AUTO CDS + TIMER as following listed.

Photocell Setting

Press the “MODE” button to select the photocell function.

Turn on the power at Dusk and turn off the power at Dawn automatically.

Illustration

ON

OFF

AUTO

AUTO

AUTO

RDM

Security feature.

On at a random time, 

and will remains ON

for 15 minutes.

Program and

Photocell

Up to 5 on/off events every day. 

The on/off events are built-into this 

product, turn ON at a random time and

the ON time is different each day, 

creating a more “lived-in” look. 
ON/OFF at your exact 

programmed time.
ON at dusk, OFF at dawn.

On at dusk, OFF at your exact 

programmed time.

Program

Setting
Photocell

Setting
Programand

Photocell

Setting

Remark

Mode

Explanation

The outputs remain always on.

Always on

The outputs remain always off.

Always off

ON/OFF program

at AUTO mode
Photocell

Program Setting

Make sure the current mode is at AUTO       mode, then press and hold

"PROG" button for two seconds to begin program setting, using the "+" and

"-" buttons to adjust the setting.

1. Press the "+" or "-" button to set the correct day.

  MO, TU, WE, TH, FR, SA, SU, MO TU WE TH FR, SA SU, MO TU WE TH FR SA SU(cycle).

2. Press the "SET" button to enter the hour setting. Press "+" or "-" buttons to set the desired hours

  for your timer to turn on. Be sure that AM or PM appears correctly.

3. Press the "SET" button to enter the minute setting. Press the "+" or "-" buttons to set the desired

  minutes for your timer to turn on. 

4. Press “SET” button to enter the program OFF setting, the “1 OFF” will appear on the display. 

  Repeat steps 1 to 3 to set your desired OFF time, up to 8 on/off programs settings.

5. While setting the programs, press and hold the “SET” button to clear the set program time.

6. Once you complete the programs settings, press the “     ” button or wait for 15 seconds to restore

  your programs to back the standby display.

Program and Photocell Setting

1.  Press “MODE” to select “AUTO Program and photocell setting”, then 

  press and hold the “PROG” button for two seconds to set the off time.

2.  Press the “+” or “-“ button to set the desired OFF day of the week program. 

  You can select each day individually, Monday to Friday, Saturday/Sunday, or an entire week to

  have your timer turn on at dusk and off at the set time.

3.  Press the “SET” button to enter the OFF time hour setting. Press the "+" or "-" buttons to set time. 

  Be sure to cycle through until AM or PM appears correctly.

4.  Press the “SET” button to enter the OFF time minutes setting. Press the "+" or "-" buttons to set

 time.

5.  You can press the “SET” button to enter additional programs, up to 8 off program settings. While

  setting the programs, press and hold the “SET” button to clear the set program time. Press the 

  “     ” button or wait for 15 seconds to store the program, and  return back to the standby display.

WARNING:

 

INSTALL THE CORD AND UNIT ABOVE GROUND LEVEL AT LEAST 2 FT WITH 

THE RECEPTACLE FACING DOWNWARD.

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may 

cause harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

  Reorient or relocate the receiving antenna.

•  

Increase the separation between the equipment and the receiver.

•  

Connect the equipment into an outlet on a circuit different from that to which the receiver is 

 connected.

•  

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, including interference that 

may cause undesired operation of the device.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to operate this equipment.

Product Description

RATINGS: 

125 VAC, 60 Hz, 15 A General Purpose, 15 A Resistive, 125 VAC 1000 W Tungsten, 

500W Electronic Ballast, 120VAC 8.3A Standard Ballast, 1/3 HP.

1. MODE: Manual override and scroll between the timer status options.     

2.      (Time): Press and hold for two seconds to set current time.

3. PROG: Press and hold for two seconds to begin setting function.

4. SET/     : Setting confirm and clear setting. 

5. < + >: To increase time and day setting.

6. <  - >: To reduce time and day setting.

7. RESET: Reset all the functions.

8. Photo sensor: The sensor will sense for light and dark, and direct the timer to act accordingly. 

9. Outlets: The three outlets located on the bottom of the timer allows the user to plug an array of 

  devices into it. 

Installation Instructions

9

1

2

3

4

5

6

7

8

Timer

2 FT

Photo

sensor

Ground

1. Mount the timer onto a wall near a GFCI receptacle

  with the timer’s photo sensor facing outward.

2.  Hang the timer from the mounting nail or screw

  using the slot on the back of the unit.

3.  Plug the power supply cord into 

  the outlet.

Made in China

SAVE THESE INSTRUCTIONS!

Setting the Timer

Reset: There has a reset hole 

under the dashboard. Insert a pin or 

paperclip end into the hole to reset the

timer. This will clear all programmed settings.

Questions, problems ? Before returning to the store, call our toll free customer support line

8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.

1-888-269-7316

Email: [email protected]

Set Current Time

1. Press and hold the "     " button for 2 seconds to enter the current time settings, press the "+" or 

  "-" button to set the correct day.

Problem

Possible cause

Corrective action

Lights do not 

turn on at dusk.

Timer is not in a good area

for light meter to function as 

there is too much ambient 

light to detect darkness.

Move the timer to another location where there is no 

ambient light.

Lights do not 

turn on, even 

when timer is

in “ON” 

position.

Lights are not in “ON” position, 

lights are not functioning, or 

timer is not receiving power.

Be sure that lights are functional by plugging them directly

into the outlet. Be sure that lights are in “ON” position if they

have their own switch. Be sure that timer is receiving power -

the LED should light up when plugged into an outlet and put

in the “ON” position.

Lights are

flashing 

(turning on

and off).

The timer is in Dusk to Dawn 

mode, and the light from the 

plugged-in lights is affecting

the light sensor.

Move the lights away from the timer, or reposition the timer

so that it does not face the lights.

AUTO Timer

or AUTO 

Photocell and

Timer mode 

programs are

not working.

1. Event programs improperly

 set

2. Event set for current time

  and has not yet been

  through a full day cycle.

1. Make sure event programs are properly set up. Refer to

  earlier instructions. Make sure the correct icons show on

  the display after programming.

  AUTO Timer: 

 AUTO Photocell/Timer:

2. If programmed event is covering current time, a full day 

  cycle is needed for program to work. For example, if the 

  current time is 5 p.m. and event 1 is set for 4 p.m. to 6 p.m.,

  the event will not automatically turn on until the next day to

  start the program.

Size: W-21 x H-29.7/cm

Front

Отзывы: