![background image](http://html.mh-extra.com/html/favero/timer-16b-52/timer-16b-52_installation-manual_546722001.webp)
1
PROGRAMMING WITH HOURLY BANDS
The option of "tariffs for HOURLY BANDS" allows the automatic change
of the tariffs at determinate times during the whole week. Therefore
exists innerly a weekly clock and the possibility to insert along all the
week at determinate times the wished tariffs. The possible tariffs are 3
and furthermore a fourth tariff (called CLUB tariff) exists, which can be
manually choosed by the operator pushing the TARIFF button. Such
tariff can also be excluded. There are twelve (12) steps to be
programmed in set order. To start the programming, turn the
INSTALLATION key in a clockwise direction.
STEP 1 will appear automatically:
The letter "C" followed by a number indicates
the total sum on the counter.
The counter
shows the number of clicks which have run off, and since the charge for
one click may be programmed for whatever you yourself decide (see STEP
2), if you wish to determine the total money receipts, multiply the figure
shown on the counter by the rate of one click. The counter runs to a total of
99,999 clicks and then returns to zero. To go back to zero, you must push
the (-) button with the tip of a pen. If you do not wish to go on to the further
stages in programming, you must turn the INSTALLATION key again in the
clockwise direction. This will be useful when access only to the counter is
required. To continue to STAGE 2, push the TARIFF button. The device
must not be in the cash counting operation during subsequent
programming.
This is the cash figure by which the amount to
be paid increases with each time interval.
That figure depends on the monetary value applicable to each individual
country. The click figures available are the following: 0.05 -0.10 - 0.20 -
0.50 - 1 - 2 - 5 - 10 - 20 - 50 -100. Ex. for EURO 0,05, USA 0,10, RUSSIA
1, JAPAN 10. You may make your choice by using the (+) and (-) buttons.
To go on to the next stage, push the TARIFF button.
This is the letter that appears before the total
sum to be paid. The following letters available
are: C d E F L P S t Y or "no letter". The choice can be made by using the
(+) and (-) buttons. To go on to the next step, push the TARIFF button.
(15 figures available) This is a set figure
charged at the beginning of every game
above and which is not included in the hourly rate. Use the (+) and
(-) buttons to register that figure. To go on to the next stage, push
the TARIFF button.
It is possible to enable or disable the
visualization of the time signal and his
influence or not on the tariffs. Use the (+) and (-) keys to set up one of the 3
values following:
.
The time signal is excluded and therefore it is not shown and does
not have any flu on the tariffs. As the result, the steps 9, 10, 11,12
which concern the tariff 2, tariff 3, the time and the hourly bands will be
skipped in the programming.
COUNT TOTALIZATOR.
PRICE OF ONE CLICK.
MONEY SYMBOL.
START-GAME CHARGE.
TIME SIGNAL ENABLING.
EXCLUDED
13345
1.
2.
0.05
3.
E
4.
0.05
5.
1
:
0
TIME SIGNAL VISUALIZED BUT HOURLY BANDS DISABLED
HOURLY BANDS ENABLING
EXCLUDED
HOURLY
ONLY ACTIVATEABLE WHEN TARIFF 1
IS WORKING
CLUB TARIFF ALWAYS ACTIVATEABLE.
HOURLY
.
.
The time signal will be shown but without no action on the tariffs.
Conseguently, the STEP 9, 10, 12 which concern the tariff 2, tariff 3
and the
will be skipped.
.
The time signal is shown and the automatic change of the tariffs will
furthermore take place in the hourly bands established to the step 12.
To pass to the next step press TARIFF.
.
The CLUB tariff will not be able to be activated. STEP 7 of the CLUB
tariff programming will be skipped.
. When the tariffs 2 or 3 are working, TARIFF button is
deactivated and therefore the hourly CLUB tariff cannot be activate.
The operator will be able to active the hourly CLUB tariff at any
time, even if the tariffs 2 or 3 are active. To pass to the next step press
TARIFF.
(Can be varied from 10 to 500 click per hour:
This STEP can be skipped if STEP 6 was programmed
to exclude the CLUB tariff. Set up the wished CLUB tariff using the (+) and
(-) keys. Keep them pressed to change quickly. To go on to the next STEP
press the TARIFF button.
hourly bands
.
It is possible to decide if using or not the hourly
CLUB tariff and if the
who will have to
manage the counter, will be able or not to his own discretion to enable the
CLUB tariff by TARIFF button. Use the (+) and (-) keys to set up one of the
3 values following:
a click is undersood to be that monetary figure
entered in STEP2).
(Can be varied from 10 to 500 clicks per
hour). Set up the wished Tariff1 using the
Keep them pressed to change quickly. To go on to
the next phase press the TARIFF button.
Used in the hourly bands. This step will be
skipped if to the STEP5 the hourly bands have
not been enabled. For the programming, as in the phase 8. To pass to the
next phase press TARIFF.
3th HOURLY
Used in the hourly bands. This step will
be skippeded if to the STEP5 the hourly
bands have not been enabled. For the programming, as in the
phase 8. To pass to the next phase press TARIFF.
SET UP CLUB TARIFF
CLUB TARIFF
CLUB TARIFF
1st HOURLY TARIFF
.
2nd HOURLY TARIFF
TARIFF
operator
(+) and (-) keys.
.
.
2
0
1
2
6.
1
7.
8.00
8.
8.00
9.
8.00
10.
8.00
_
( )
_
( )
_
(
_
)
_
_
TIMER 3 - 22B
with hourly bands
ENGLISH
INSTALLATION GUIDE
516-F01