ECO Spot LED40DE User Manual
Handling Instructions
Warranty
One Year from Date of Purchase. Keep your receipt for reference and contact your dealer
in case of warranty issues.
Projection Lenses
The projector accommodates interchangeable projection lenses to allow optimizing the
projection size and resulting brightness at varying distances. The more narrow the lens,
the smaller and brighter the image will be at a given distance. For example, cutting the
projection size in half, will quadruple its brightness.
Gobo Rotator
If the fixture is equipped with a gobo rotator, it can be turned on/off with the silver push-
button on the front plate underneath the lens. There are no controls for rotating speed or
direction.
Focusing
•
There is a weatherproof connector between the driver (power supply) and
projector, which can be opened for easier handling.
Always make this
connection first before powering up the driver, otherwise the LED can be
damaged by the power surge.
•
Before the initial start-up, please unpack and carefully check for damage caused
during transportation.
•
Place your fixture at a suitable place with good air flow.
•
Make sure there are no flammable materials close to the lamp.
•
When suspending the fixture above ground level, verify that the structure can hold
at least 10 times the weight of all installed devices.
•
Verify that all external covers and rigging hardware are securely fastened and use
an approved means of secondary attachment such as a safety cable.
•
Power up the projector.
•
If the fixture is equipped with a gobo rotator, turn it on, once the gobo projects in
the desired position, turn it off.
•
Loosen the outer ring around the lens that acts as a water seal.
•
Focus the projection by twisting the lens in and out until the image is well focused.
When used for the first time, the lens will often need to be twisted outwards many
rotations to reach the focusing point. When in doubt, keep going.
•
Re-tighten the outer ring to ensure a tight seal of the lens.
Page 2
Copyright © 2014 Globus New Media LLC
