0549-991-41---50a_2019.11.indd
ETS 42
0549-991/42a
Page 4 of 18
Operator manual
2 SAFETY
2.1
Appropriate use
The swing door drive mechanism ETS 42 has been exclusively designed for operating swing doors.
Any other use beyond these application limits is deemed inappropriate and inadmissible!
In the event of an inappropriate use of this system, the safety of the user may be jeopar dized
and/or the installation be damaged. The manufacturer declines all responsibility for these inju
-
ries/damages!
2.2
Safety notices
The present instructions uses the following symbols and notes in order to point out certain resi
-
dual dangers:
Warning:
Involving danger to life and limb.
Attention:
A situation where material could be damaged or the function impaired.
Note:
Hints which facilitate the work.
2.3
Safety regulations
2.3.1 Principles
• Children
must not be involved in the cleaning or user maintenance of this system. Very young
children
must not operate the system.
Young children
must only operate the system when
under the close supervision of an adult.
Older children and vulnerable persons may use this sys
-
tem safely once they have been shown, while under suitable supervision, how to use it approp
-
riately.
Highly vulnerable persons can only use the system safely when under close supervision, or if it
is fitted with corresponding additional equipment that amply fulfils the scope-of-use standards
of the norm EN 16005.
• The installation has been calculated, designed and manufactured on the basis of the latest
state-of-the-art technology and the generally recognized safety-relevant rules and regulations.
It may only be operated if it is in perfect condition, taking into account the specifications of the
present manual. Any use beyond the defined application limits is inadmissible!
• The installation is to be operated and maintained in such condition that the safety is guaranteed
at all times. An integral part of this condition is the appropriate use, the compliance with the
operating conditions prescribed by the manufacturer, as well as the regular service (mainte
-
nance/checking).
• In order not to create any dangerous squeezing and shearing points, no structural modification
must be made within the door surroundings, without prior authorization from
ECO Schulte
GmbH & Co. KG. Furthermore, it is important that no objects (such as furniture, pallets, etc.) be
placed in the vicinity of the door.
• All further interventions on and modifications of the installation that are not described in the
present instructions are forbidden!
