background image

16 

JINECI05 Rev. E. 11/11/2014 

COMMISSIONING AND HANDOVER 

 

APPLIANCE 

C

HECK

 

Please check that all components are correctly 
assembled and working correctly. 
 
Ensure the Door Catch mechanism is adjusted 
correctly and the 12mm Rope Seals around the 
door are air tight and sealing. 
 
Ensure the Air Controls are working correctly. 
 
Eco-ideal Stoves recommend that you carry out a 
smoke draw test to check the soundness of the 
chimney/flue system and seals: 
 
Place a Smoke Pellet in the centre of the Grate, 
ensure that all of the Air Controls are fully open 
and close the Door. 
 
The smoke should now be drawn up the chimney 
and you should be able to see it exit from the 
chimney/flue terminal. 
 
We recommend that you do this test with all of 
the windows and doors, to the room where the 
appliance is fitted, closed.  
 
If there any adjoining room(s) that have an 
Extractor Fan fitted, open the adjoining door to 
ensure that the chimney/flue system is not 
compromised when the fan is operating. 
If there is a ceiling fan fitted in the room please 
operate it and ensure that it does not affect the 
operation of the chimney/flue system. 
 

If any of these tests fail, please re-check the 
suitability of the chimney/flue system together 
with the ventilation. 
 

A small fire can now be lit and allow the appliance 
to heat up slowly ensuring that no products of 
combustion enter into the room. 
 
When the appliance has reached working 
temperature open the Door and carry out a 
spillage test using a smoke match around the door 
opening. 
If there is excessive spillage please allow the 
appliance to cool and then re-check the 
chimney/flue system and ventilation.  

 
Do not run the stove at full output for at least 24 
hours. 
 
On completion of the commissioning: 
 
Upon  completion,  allow  a  suitable  period  of  time 
for any fire cement and mortar to dry out.  A small 
fire  may  then  be  lit  and  checked  to  ensure  the 
smoke and fumes are taken from the stove up the 
chimney and emitted safely to atmosphere.  Do not 
run the stove at full output for at least 24 hours. 
 
Please instruct the user on the safe operation of 
this appliance, how the controls work and basic 
maintenance requirements. 
 
Ensure that the operating instructions and 
appliance tools are left with the customer and the 
check lists have been filled out correctly. 
 
Please advise the customer on the correct use of 
the appliance with the fuels likely to be used on 
the stove and warn them to use only the 
recommended fuels for the stove. 
 
Advise the user on what to do should smoke or 
fumes be emitted from the stove.   
 
The user should be warned to use a fireguard to 
BS 6539 in the presence of children, aged and/or 
infirm persons. 
 
Eco-ideal Stoves also recommend that a CO alarm 
is fitted into the room where the appliance is 
located.  
 
 
 
 
 
 
 
 
 
 
 
 

 

Содержание CVSECI05FM

























Отзывы: