Eco Engineering Easypell 16, Руководство по установке

Страница: 51 / 64

Fault texts 51
Display:
Error code: 7
Description: Safety temperature limiter has tripped
Cause and Remedy: safety temperature limi-
ter unplugged
ڃ
connect up safety temperature limiter and check
cable connections
safety temperature limi-
ter has tripped
ڃ
check boiler controller
safety temperature limi-
ter defect
ڃ
allow boiler to cool and reset alarm
Display:
Error code: 8, 9
Description:
Combustion chamber minimum temperature not reached during ignition phase
Cause and Remedy: no pellets available
ڃ
fill up with pellets
ignition electrode defect
ڃ
check ignition electrode (approx. 200
ˑ
) replace
if required
ignition nozzle blocked
ڃ
clean burner plate and ignition tube
Combustion chamber
sensor contaminated
ڃ
clean combustion chamber sensor and fcombus-
tion chamber tube
Combustion chamber
sensor is not inserted in-
to tube
ڃ
insert combustion sensor into combustion sensor
tube
Combustion chamber
sensor short-circuit
ڃ
Measure sensor (approx. 5mV at 125° C) replace
if required
Display:
Error code: 10
Description: Flame return gate open fault.
Cause and Remedy: flame return gate
unplugged
ڃ
Connect up flame return gate and check cable
connections
Flame return gate does
not reach OPEN limit
switch
ڃ
check ball valve to see if it is jammed
no signal although open
ڃ
check cables and flame return gate
Error code:
11
Description:
Flame return gate closed fault.
Cause and Remedy: flame return gate
unplugged
ڃ
Connect up flame return gate and check cable
connections
Installation Manual Easypell 16 — 32kW