www
.capitalproducts.co.uk
+44 (0) 844 840 0555
Platinum BBC
1.1. Cleaning
A regular and thorough cleaning regime is essential for
the efficient and hygienic operation of your bottle cooler.
Before undertaking any cleaning operation, ALWAYS
turn the case off and if possible, disconnect it from the
mains power supply.
Avoid water splashing onto the case’s electrical
elements. If water splashing occurs, make sure that
all electrical components are thoroughly dry before
reconnecting to the power supply. Never use abrasive
or caustic cleaning agents.
1.2. Exterior/Internal surfaces
Painted or metal surfaces should be cleaned with a
cloth soaked in warm soapy water. Surfaces should be
dried with soft cloth. Shelves should be removed for
cleaning as above.
1.3. Glass & Mirror
Glass and mirrored surfaces should be cleaned with a
suitable glass cleaner. Glass and mirrored surfaces may
be wiped with a soft dry cloth.
1.4. Evaporator Fans
Ensure fans are NOT running when cleaning the fan
blade.
Clean around evaporator fans
1.5. Air cooled Condenser and Cooling Fins
Carefully vacuum dust and airbourne debris from the
condenser unit and cooling fins located at the rear of
the unit. Exercise care not to damage fins.
Beware of the sharp fins and take care when cleaning
this area.
1.6. Condensate Tray
The self-evaporating water tray which collects defrost
water should be cleaned regularly.
Spilled milk and other dairy products collecting in
the condensate tray may lead to odor and should be
cleaned immediately.
1.7. Water Outlets
Outlets for waste water should be cleaned regularly to
ensure continuous flow of waste water.
Maintenance
The condensor coil located at the rear of the unit
should be kept clean and clear for maximum
efficency.
When loading the cabinet:
• ensure you do not block the air duct located at
the back of the unit and the fan on the roof panel
• blocking the airflow from these will cause a
decrease in performance
• for maximum performance maintain at least
50mm of clearance between the contents and the
air duct
Shelves can be adjusted to suit your needs. Always
ensure that they are secure before loading with
products.
The temperature controller is located at the bottom
of the unit and is set to ‘4 °C’ as default.
Do not leave the door open for prolonged periods of
time. For maximum efficiency close door immediately
after use.
Cleaning & General Maintenance
