Eco Air ECO940SD, Руководство пользователя

Страница: 10 / 17

____________________________________________________________________________________
10
Manual Operation
NOTE :
The unit must be turned off before operating
the manual control button. If the unit is operational,
continue pressing the manual control button until the
unit is off.
1
Grasp both sides of the panel and pull it down, the
panel opened upward to an angle of 15
°
. Push the
panel upward and then lift it up.
2
One press of the manual control button will lead to
the forced AUTO operation. If press the button
twice within five seconds, the unit will operate
under forced COOL operation.
3
Close the panel firmly to its original position.
CAUTION
:
●
This button is used for testing purposes only. You
had better not choose it.
●
To restore the remote controller operation, use the
remote controller directly.
ADJUSTING AIR FLOW
•
Adjust the air flow direction properly otherwise, it
might cause discomfort or cause uneven room
temperatures.
•
Adjust the horizontal louver using the remote
controller.
•
Adjust the vertical louver manually or by the
remote controller(depending on the models)
To set the vertical air flow(Up--Down) direction
Perform this function while the unit is in operation. Use
the remote controller to adjust the air flow direction.
The horizontal louver can be moved at a angle of 6° for
each press or set to move up and down automatically.
Please refer to the “REMOTE CONTROLLER
ILLUSTRATION” for details.
To set the horizontal air flow direction (left - right)
Adjust the vertical louver manually using the lever on
the left or right side of the vertical louver arm
(Depending on model). Take care not to catch fingers
on the fan, horizontal louver or to damage vertical
louvers. When the air conditioner is in operation and
the horizontal louver is in a specific position, move the
lever at left (or right, depending on model) end of the
air outlet to the desired position.
NOTE : For some
models, it can be controlled automatically by the
remote controller. Please refer to the “REMOTE
CONTROLLER ILLUSTRATION” for details.