Bedienungsanleitung / User manual COMPACT HX-2
ENGLISH
17
4.1 Preparation for installation
•
Place the machine on an even and stable surface. You can regulate the height by adjusting the
feet of the machine.
•
Never place the machine on hot surfaces.
4.2 Electrical connection
•
The electrical connection has to be conducted by an authorised specialty dealer.
4.3 Water supply connection
Important
Make sure that the water supply installation is connected to a potable water supply with an operating
pressure with max 3 bars. Please note that often the pressure of the water supply varies. If the water
supply pressure temporarily exceeds 1.5 bars, use a pressure regulator. Furthermore, a shut-off valve
should be used. This valve should be located where it is easily reached, so that the water supply can
be interrupted at any time.
Water connection 3/8” Connecting the metal hose Connection (wrench size 20)
Important
Rotary pumps require pre-pressure. For this reason, they should always be connected to a fixed water
supply and not be used with an external, pressure-less water container. This could damage the pump.
4.4 Installation of the water drainage
The hose for the waste water is inserted into the appropriate L-connector at the bottom of the machine and the
already installed syphon drainage. Then the L-connector is screwed together with the drainage funnel. Please make
sure that the drainage hose is positioned in a manner that no water can accumulate in it.
Important
•
Connecting the machine to a fixed water connection and installing the pressure regulator has to
be carried out by authorized service personnel.
•
In order to avoid a premature calcification of your machine, we recommend to install a water
softening system.
