INSTALLATION, OPERATION AND MAINTENANCE
MANUAL E-MOTION AUTOMATIC CONTROL
EC_MAN_IST_022
Rev. 5
3
EN
1. DETAILS
This manual applies to:
installation
use and maintenance
of the E-MOTION automatic control.
The installation part is restricted to qualified technical personnel only.
1. 1 GENERAL WARNINGS
Before installing, using or doing the maintenance of E-MOTION automatic control, you must read
and understand this manual thoroughly.
This manual is part of the automatic control and should be kept by the customer or user for future
reference by the customer or by the installer or maintainer.
This manual aims to provide all the necessary instructions to ensure proper installation and maintenance.
ECLISSE S.r.l. reserves the right to modify and improve the manual and the described product at any time
without notice.
The data presented in this document have been prepared and checked with great care, but ECLISSE
S.r.l. declines all responsibility for any inaccuracies due to errors or omissions in printing or transcription.
The E-MOTION automatic control installed in a single leaf subframe constitutes a machine as described in
the Machinery Directive 2006/42/EC.
The full analysis of the essential health and safety requirements, as set out in the Annex to the Machinery
Directive, must be considered valid only if:
The procedures described in the installation manual have been followed correctly.
The type of installation corresponds to that shown in the manual.
Any procedure or action taken in the operation, installation, operation, maintenance and use of the
machine not intended and described in this manual will not be covered by this analysis.
In this way ECLISSE S.r.l. is not responsible and the installer will assume full responsibility for the
fulfilment of the essential health and safety requirements.
