5
Eclipse Winnox Burner, WX Series, V2, Installation Guide 111, 2/26/2010
Safety
Introduction
This section is provided as a guide for the safe operation
of a Winnox burner system. All involved personnel should
read this section carefully before operating this system.
Safety
Ŷ
The Winnox burners are designed to mix fuel with
air and burn the resulting mixture. All fuel burning
devices are capable of producing fires and
explosions if improperly applied, installed,
adjusted, controlled, or maintained.
Ŷ
Do not bypass any safety feature; fires and
explosions may result.
Ŷ
Never try to light the burner if the burner shows
signs of damage or malfunctioning.
Ŷ
The burner might have HOT surfaces. Always wear
protective clothing when approaching the burner.
Ŷ
This manual provides information in the use of
these burners for their specific design purpose. Do
not deviate from any instructions or application
limits described herein without written approval
from Eclipse.
Capabilities
Adjustment, maintenance and troubleshooting of the
mechanical and the electrical parts of this system should
be done by qualified personnel who has experience with
combustion equipment.
Operator Training
The best safety precaution is an alert and trained
operator. Train new operators thoroughly and have them
demonstrate an adequate understanding of the
equipment and its operation. A regular retraining schedule
should be administered to ensure operators maintain a
high degree of proficiency.
Replacement Parts
Order replacement parts from Eclipse only. All Eclipse
approved, customer supplied valves or switches should
carry UL, FM, CSA, CGA, and/or CE approval, where
applicable.
DANGER
WARNING
NOTICE
2
