217
217
●
Touch
to return to the immediately
preceding screen.
●
Next page is displayed by touching
or .
●
It will display Completed when the setting
is completed, then it will return to
Command Select screen and displays
Store on the set command.
●
“Error, try once again” is displayed when
the data reading fails.
●
Touch
to return to the immediately
preceding screen.
●
Touch
to return to the immediately
preceding screen.
ATTENTION
If “Error, try once again” is shown on the
display, once again select a desired function to
set.
5
Touch
until the Command
Select screen is displayed.
6
Touch the command you wish to set.
7
While pressing the steering switch
button to record, touch the
until a beep sounds.
Store
Store
8
Assign the desired functions to the
steering wheel switch buttons by
repeating Steps 6 through 7.
9
Touch .
10
Touch
after confirming the final
confirmation screen.
Finalize
Done