Eclipse AVN 5495, Руководство пользователя

Страница: 104 / 199

102
3. Changing the search result route
Navigation guidance
Adding a destination
After setting a destination, up to 5 more destinations can be set.
In the following situations, set an additional destination.
●
When setting a transit point between the present location and set destination.
●
When changing the set destination into a transit point and setting a new destination.
Using the same method as for setting a destination, touch to add a new destination.
(
See "Setting by directly moving the map"
on page 89,
"Set from a registered point"
on page
91 and
"Set using a map retrieval method"
on page 92).
Touch .
Touch for Destination.
Select the map retrieval method to
display the map on which a
destination is to be set.
●
"Map retrieval methods" and
"Performing operations on a retrieved
map"
(page 48 , 85 ).
Add to
Route
Add
●
Destinations can be set using detailed maps with a reduction scale under 0.5
miles.
●
Geographical points on maps representing set destinations are automatically
registered (up to 100 points) and can be used to retrieve a map when setting a
destination. After exceeding 100 points, the oldest entry is deleted every time a
new one is entered. Unnecessary points can be deleted. (Refer to the Section
"Deleting destination archives" on page 162.)
●
If stops along the way are set, they could be deleted from the route when you
add a new destination, depending on the location of the points involved.
●
When 2 or more destinations are set, appears.
Reorder