8
Installation & Adjustment of Footrests (Footplate)
Installation
1.
Align and mount the arc plate hole of the leg support
into the pin.
2.
Rotate gently the leg support from outside to inside
until the spring is fixed.
If it is necessary to remove the leg support, push the spring
lock from the inner side of the leg support, twist it outwards
until certain angle and elevate it to pull out from the frame pin.
Note: There is a right and left footrest assembly.
Adjustment of Footrest
The footrests have many different adjustments.
To change the angle of the footrest assembly, locate the
adjustment lever on the top outer side of the footrest. Loosen
and lift or lower the footrest to the correct angle. Tighten the
adjustment lever.
To lengthen or shorten the footrest, locate the inner tube lock at the base of the main footrest tube.
Use a Hex key tool to loosen the screw. The inner tube can now be made longer or shorter.
Tighten screw once desired length is achieved.
Installation & Adjustment of Armrests
1.
Insert the square tube of the armrest into
the square hole of the wheelchair frame
2.
Push in the armrest button to release the
lock to allow the armrest to slide freely
within the holder.
3.
Release button at desired height. Gently
move the armrest up or down to make
sure lock is secure.
