7
Setup & Operation
Out of the Box
The Apollo tilt wheelchair is a modern, comfortable and multifunctional wheelchair. It designed
especially for people with disabilities and for elderly people with nursing and transport purposes.
The tilt wheelchair is basically fully assembled within the box. A simple setup with some minor
adjustments is all that is needed to prepare the tilt wheelchair for use.
Note:
Before setup check the contents of the box to see whether all parts, accessories, user
manual, etc. are included. If not, please contact your dealer or Eclipse Medical Inc.
Tilt Wheelchair Unfolding
1.
Open the box and take out the wheelchair from the box.
2.
Place the wheelchair on the ground.
3.
Push down the tilt wheelchair seat until the wheelchair is completely opened and extended
ready for use.
Installation of Adjusting Cylinders
There are two adjusting cylinders, one is for adjusting the reclining angle of the backrest and the
other is for adjusting the reclining angle of the seat. The angles can be adjusted according to every
user for his/her comfort.
Installation of Backrest Adjusting Cylinder
The backrest adjusting cylinder is located at the
back of the wheelchair. Align the positioning hole of
the adjusting cylinder to the frame mounting point
and place the lock pin completely through the hole.
Note:
after placing the bolt through the hole,
assure that the pin is locked in place
Installation of Seat Adjusting Cylinder
The seat adjusting cylinder is located at the back of
the wheelchair. Align the positioning hole of the
adjusting cylinder to the frame mounting point and place the lock pin completely through the
hole.
Note:
after placing the lock pin through the hole, assure that the pin is locked in place
