2. Description of components:
Parts No.
Description
Function
1
Die holder
For fixing die
2
Die
For crimping, interchangeable die
3
Latch
For locking /unlocking the crimping head
4
Die holder
For fixing die
5
LCD
Showing the data (crimping times, electricity
capacity, error information)
6
Keyboard
For power switch, function switch, LED light switch
7
Limited screw
For prevent head from dropping or popping
8
LED indicator
For lighting
9
Trigger
For operating or retracting the piston in case of
incorrect operation.
10
Lock
Locking the battery
11
Battery
For supplying power, rechargeable Li-ion
（
18V
）
.
Set the output
force
Press
for 3 s enter into setting status, the data display
will flash. Press the
per time, output data increase by
10 KN (1Ton) (or 5 KN (1.2 Ton), according to requirement),
this action is circulated from Min KN to Max KN. Press
for 3 s or leave it 15 s, it returns to initial state.
LED
Convenient in dark environment, with a light symbol showing
on the LCD, through
to get into start status.
display, and lighting. LCD background lighting, meanwhile
press the power button, the front LED lighting, after 20 s, the
light turn off automatically. During LED lighting, keep for
pressing
to turn off the LED even for the LCD
background light.
Battery power
full power.
,
meanwhile flash and buzzing according to the flash
frequency . Charge the battery.
Error showing
Error occured, such as motor damaged, drive system error and
hydraulic system problem… the tool stop working. LCD
showing “error data” as following: it stands for “over power
capacity”
Power off
Press
for 3 s or leave the tool 30 s to off the power
USB port with
computer
Take the battery away from the tool, connect the USB with a
computer to exchange the data. LCD showing symbol
