TROUBLESHOOTING
FAULT
ANALYSIS
SOLUTION
Tool
is inoperative
1.
Dirt, contaminants, etc
in ram area of tool.
2.
Tool battery contacts
damaged
3.
Tool components worn
or damaged.
1.
Clean tool
2.
Reform contacts
3.
Return tool to manufacturer or
distributor
Motor
is inoperative
1.
Low or uncharged
battery
2.
Broken
switch components
1.
Check charge of battery.
Inoperative battery may be
discharged or may have
reached life expectancy
2.
Return tool to manufacturer or
distributor
Motor runs
but tool will not
complete a cycle
1.
Oil level low
2.
Air in
hydraulic system
3.
Cold oil
1.
Return tool to manufacturer or
distributor
2.
Return tool to manufacturer or
distributor
3.
Store tool in warm area.
Dies stop during
operation
1.
Oil level low
2.
Air in
hydraulic system
1.
Return tool to manufacturer or
distributor
2.
Return tool to manufacturer or
distributor
LED glows for 20
seconds
1.
Battery charge low
1.
Charge or replace battery
Tool loses oil
(leaks)
1.
Damaged
internal seal
1.
Return tool to manufacturer or
distributor
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write the month and year of purchase. Keep this
manual and the receipt in a safe and dry place for future reference.
IMPORTANT SAFETY INFORMATION
In this manual, on the labeling, and all other information
provided with this product:
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
